Turning on the power, Turning on the power -5 – Toshiba NB300 User Manual
Page 41
User’s Manual
3-5
Getting Started
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the Monitoring of power condition
section in Chapter 6,
for more information.
1. Open the computer's display panel.
2. Press the computer's power button.
■
When opening the panel, please be careful not to force it beyond the
point where it moves easily.
■
Be careful not to open the display panel too far as this could put stress
on the display panel’s hinges and cause damage.
■
Do not press or push on the display panel.
■
Do not lift the computer by the display panel.
■
Do not close the display panel with pens or any other objects left in
between the display panel and the keyboard.
■
When opening or closing the display panel, place one hand on the
palm rest to hold the computer in place and use the other hand to
slowly open or close the display panel (Do not use excessive force
when opening or closing the display panel).
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section
for more information.
■
The power button is disabled while the display panel is closed.
■
Volume cannot be adjusted during Windows Setup.