Heat dispersal, Heat dispersal -45, Power supply mode settings – Toshiba Tecra M11 User Manual

Page 130: Enable under battery mode settings

Advertising
background image

User’s Manual

4-46

Operating Basics

Power supply mode settings

Your PC has multiple charging modes so that many different USB devices

can be supported for USB Sleep and Charge function. Typical Mode

(Default) is suitable for a wide range of digital audio players.
However, determining which mode is suitable for your USB device is

unknown without trying. Try each mode, using the following procedure,

from Typical Mode to Alternate Mode (*1) to find the suitable mode for

your USB device to charge.
This function may not be able to be used with some connected external

devices even if the appropriate mode is selected. In this situation, clear the

"Enable USB Sleep and Charge" check box and stop using this function.
*1. Some computers may not support all modes.

Enable under Battery Mode Settings

This utility can be used to specify the lower limit of remaining battery life for

USB Sleep and Charge. Move the slider bar to specify the lower limit. If the

remaining battery life falls below the setting, the USB Sleep and Charge

function will be stopped.

Heat dispersal

To protect against overheating, the processor is equipped with an internal

temperature sensor which activates a cooling fan or lowers the processing

speed if the computer's internal temperature rises to a certain level. You are

able to select whether to control this temperature by either turning on the

fan first, then if necessary lowering the processor speed, or by lowering the

processor speed first, then if necessary turning on the fan. Both of these

functions are controlled through the Power Options.
When the processor's temperature falls within normal range, the fan will be

turned off and the processor operation returned to its standard speed.

If the processor's temperature reaches an unacceptably high level with

either setting, the computer automatically shuts down to prevent any

damage. In this instance all unsaved data in memory will be lost.

Advertising