Toshiba Tecra M11 User Manual

Page 154

Advertising
background image

User’s Manual

7-5

HW Setup

Power will be automatically turned on when a signal is received from an

administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The

battery retention time will be shorter than the times listed in this manual

when this function is enabled. Refer to the section in chapter 6,

Retaining

data with power off

.

Built-in LAN

This feature enables or disables the Built-in LAN.

USB

USB KB/Mouse Legacy Emulation

You can use this option to enable or disable USB keyboard/mouse legacy

emulation so that, even if your operating system does not support USB

devices, you can still use a standard USB mouse and keyboard - to achieve

this you should set the appropriate option(s) to Enabled.

The Wake-up on LAN function consumes power even when the

system is off. Leave the AC adaptor connected while using this

feature.

Regarding Wake-up on LAN from sleep or hibernation, you must check

the "Allow the device to wake the computer" check box within the LAN

Device properties. (This feature does not effect the Wake-up on LAN

from sleep or hibernation.)

Enabled

Enables Wake-up on LAN from shutdown.

Disabled

Disables Wake-up on LAN from shutdown.

(Default)

Enabled

Enables Built-in LAN functions (Default).

Disabled

Disables Built-in LAN functions.

Enabled

Enables the USB KB/Mouse Legacy Emulation

function (Default).

Disabled

Disables the USB KB/Mouse Legacy Emulation

function.

Advertising