Toshiba Tecra R10 - Manual (Page 170)

8-18 User’s Manual
TECRA R10
Sound system
In addition to the information in this section, please also refer to the
documentation supplied with your audio device.
An error will occur if a
memory module is
inserted into Slot B
while no memory
module is inserted in
Slot A. Remove the memory module from Slot B and
insert it into Slot A.
Problem Procedure
Problem Procedure
No sound is heard Adjust the volume control dial.
To increase the volume move the volume control
dial to the left, and to decrease it move the
volume control dial to the right.
Check the software volume settings.
Please check to see if Mute is turned to Off.
Check to make sure the headphone connection
is secure.
Check within the Windows Device Manager
application to ensure the sound device is
enabled and that the device is properly working.
For further information, please refer to
“Troubleshooting in Windows” section of
Windows Help and Support.
Annoying sound is
heard In this instance you may be experiencing
feedback from either the internal microphone or
an external microphone connected to the
computer - please refer to
Sound System in
Chapter 4, Operating Basics , for further
information.
Volume cannot be adjusted during Windows start
up or shut down.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.