Toshiba Tecra R10 User Manual

Page 198

Advertising
background image

G-4

User’s Manual

TECRA R10

7. Lift the plastic film and clean the cooling module using a vacuum

cleaner or other cleaning tool.

Figure G-2 Lift the plastic film

8. Seat the Cooling module cover back into place on the computer to

reattach.

9. Secure the Cooling module cover with one screw.

10. Install the battery pack (refer to the

Replacing the battery pack

section

in Chapter 6,

Power and Power-Up Modes

, if required).

11. Turn your computer over.

Do not use a ball pen, cotton swap or similar to remove dust. If these touch
the inside of the computer, it could be damaged or become clogged,
leading to further problems.

Plastic film

Advertising