Toshiba Tecra R10 - Manual (Page 67)

User’s Manual 3-19
TECRA R10
■ The maximum capacity of SD memory cards is 2GB. The maximum
capacity of SDHC memory cards is 16GB.
Inserting an SD/SDHC memory card
To insert an SD/SDHC memory card, follow the steps as detailed below:
1. Insert the SD/SDHC memory card into the SD Card slot on the front of
the computer.
2. Press the SD/SDHC memory card gently to ensure a firm connection is
made.
Figure 3-5 Inserting an SD/SDHC memory card
Removing an SD/SDHC memory card
To remove an SD/SDHC memory card, follow the steps as detailed below:
1. Open the Safely Remove Hardware icon on the Windows Taskbar.
2. Point to SD Memory Card and click the left Touch Pad control button.
3. Press the SD/SDHC memory card to partially extend it out of the
computer.
Card Type Capacities
SD 8MB, 16MB, 32MB, 64MB, 128MB, 256MB,
512MB, 1GB, 2GB
SDHC 4GB, 8GB, 16GB
SD/SDHC memory card
SD Card slot
■ Make sure the SD/SDHC memory card is oriented properly before you
insert it.
■ Make sure that the SD/SDHC memory card is facing the correct
direction when inserting it into the SD Card slot.
■ Do not turn the computer off or switch to Sleep Mode or Hibernation
Mode while files are being copied - doing so may cause data to be lost.