Auto tuning – Toshiba ML933 User Manual

Page 20

Advertising
background image

20

SETTING UP YOUR TV

En

glis

h

With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.

Operator Selection:

You can choose the Cable operator depending on the
Country you set.

DTV Scan Type:

This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.

DTV Start Frequency:

This sets the frequency from which the scan will begin.

DTV End Frequency:

This sets the frequency at which the scan will end.

DTV Modulation:

You can choose from five QAM modulation settings.

DTV Symbol Rate:

This is the baud rate (KS/s) of the scan.

DTV Network ID:

This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.

NOTE: As new services are broadcast, it will be necessary to
re-tune the television in order to view them.

Auto Tuning will completely re-tune the television and can be

used to update the channel list. It is recommended that Auto

Tuning is run periodically to ensure that all new services are

added. All current channels and settings, i.e. locked channels,

will be lost.

a

Press MENU /

C

c

to highlight Setup icon.

b

Press

B

/

C

c

to highlight System Setup icon and

press OK.

c

Press

B

or

b

to select Auto Tuning and press OK.

d

Press

C

or

c

to select Yes and press OK.

Press

C

or

c

to select DTV and ATV, DTV or ATV, if

available, then highlight Start Scan and press OK to
continue with the Auto Tuning.

NOTE: If you have selected “Others” for the Country
field in the System Setup menu, and selected a
tuning mode other than “DTV” , choose the optimum
ATV broadcasting system (B/G, I, D/K or L).

The television will start to search for all available DTV
and/or ATV services.

You must allow the television to complete the
search.

When the search is complete, the Auto Tuning screen
will display the services found.

e

Press

B

or

b

to move through the list to select a

channel and press OK to view.

Auto Tuning

System Setup

Menu Language

English

Country

Ant/Cable In

ATV Manual Tuning

DTV Manual Tuning

Quick Setup

DTV Settings

Auto Tuning

Germany

Auto Tuning - Antenna

DTV and ATV

Tuning Mode

Start Scan

Advertising