Toshiba ML933 User Manual

Page 41

Advertising
background image

41

CONTROLS AND FEATURES

Engl

ish

g

Press

B

or

b

to select Authentication and press

C

or

c

to select Open System, Shared Key, WPA-PSK or

WPA2-PSK.

h

Press

B

or

b

to select Encryption and press

C

or

c

to select None, WEP, TKIP or AES.

NOTE:
• Certain encryption types are only compatible with

specific authentication types.

- When Authentication is Open System, only WEP

or None is compatible.

- When Authentication is Shared Key, only WEP is

compatible.

- When Authentication is WPA-PSK or WPA2-PSK,

only TKIP or AES is compatible.

• When incompatible Authentication/Encryption

pairings are detected, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.

• There is only one key ID to set for WEP encryption.

i

Press

B

or

b

to select Security Key and press OK.

j

Input the Security Key by using the Software
Keyboard (see page 44). To save your setting, press
the BLUE button.

NOTE: This item is grayed out when Encryption is
None.

k

Highlight Done and press OK.

NOTE: When Encryption is None, a message will
appear. Press

C

or

c

to select Yes and press OK.

NOTE: Settings are not saved if BACK is pressed before Done
is selected.

Wireless Information

The settings configured in Wireless Setup can be confirmed.

a

Press QUICK to open the Quick Menu.

b

Press

B

or

b

to select Wireless Information and

press OK.

c

When the Network Type is Wireless, a Wireless
Information window will appear.

NOTE: Press the RED button to scan for all APs.

Item

Description

Status

Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the TV is
not connected with the AP.

Signal

Connection signal strength with AP
(STRONG/MEDIUM/WEAK)

Speed

Link with AP

Mode

Working mode (11a, 11b, 11g, 11n)

Network Name

SSID set

Authentication

Authentication set

Encryption

Encryption set

Security Key

Security Key set

AP MAC
Address

The AP’s MAC address is displayed when
the TV is connected with the AP.

TV MAC
Address

The MAC address of the USB (Dual Band
WLAN Adaptor) is displayed.

DHCP

Enabled is displayed when using DHCP.
Disabled is displayed when not using
DHCP.

IP Address

The TV’s IP address

Subnet Mask

Value of the Subnet Mask

Default
Gateway

Address of the Default GATEWAY

DNS

Address of the DNS

Quick Menu

Picture Size

Super Live

Sleep Timer

3D Settings

Channel Options

Headphone Level

Wireless Information

50

00:00

Speakers

TV Speakers

More Information

Advertising