Toshiba ZL2 - Manual (Page 33)

33
CONTROLS AND FEATURES
Engl
ish
A 3D PIN code is necessary for using 3D Safety Settings.
To enter a new PIN code:
a
In the Preferences menu, press
B
or
b
to select 3D
Setup and press OK.
b
Press
B
or
b
to select 3D PIN Setup and press OK.
c
Press the number buttons to enter a 4-digit number.
Confirm the code.
NOTE: PIN code cannot be set to “0000”.
To change or delete your PIN code:
a
In the Preferences menu, press B or b to select 3D
Setup and press OK.
b
Press B or b to select 3D PIN Setup.
c
Press the number buttons to enter your 4-digit PIN
code.
d
Select Change PIN or Delete PIN and press OK.
NOTE:
• PIN code cannot be set to “0000”.
• If PIN is deleted, 3D Safety Settings is grayed out,
and the settings are reset to the factory default.
When this feature is set to On, a message is displayed onscreen
when a 3D signal is received.
a
In the Preferences menu, press
B
or
b
to select 3D
Setup and press OK.
b
Press B or b to select 3D Safety Settings and press
OK.
c
Enter your 4-digit 3D PIN code.
d
Press
B
or
b
to select 3D Start Message.
e
Press C or c to select On or Off.
When this feature is set to On, you must enter 3D PIN code for
changing display mode.
a
In the Preferences menu, press
B
or
b
to select 3D
Setup and press OK.
b
Press B or b to select 3D Safety Settings and press
OK.
c
Enter your 4-digit 3D PIN code.
d
Press
B
or
b
to select 3D Lock.
e
Press
C
or
c
to select On.
When the 3D Timer Lock feature is set to On, neither the PIN input
window nor the 3D start message will be shown while the 3D
Enable timer is active, even if a switch to 3D Mode occurs. This
helps to avoid asking for the 3D Lock PIN and displaying 3D start
message every time when switching to 3D.
a
In the Preferences menu, press B or b to select 3D
Setup and press OK.
b
Press
B
or
b
to select 3D Safety Settings and press
OK.
c
Enter your 4-digit 3D PIN code.
d
Press B or b to select 3D Timer Lock.
e
Press C or c to select On.
This feature helps to remind you not to watch 3D video for
extended periods of time. Once a set period of time has passed, a
dialogue will be shown asking you if you wish to continue
viewing or not.
a
In the Preferences menu, press B or b to select 3D
Setup and press OK.
b
Press
B
or
b
to select 3D Safety Settings and press
OK.
c
Enter your 4-digit 3D PIN code.
d
Press
B
or
b
to select Enable 3D Timer.
e
Press
C
or
c
to select 30, 60, 90, or 120 minutes.
f
To cancel the timer, select Off.
Setting the 3D PIN code
Setting 3D Start Message
Setting 3D Lock
Setting 3D Timer Lock
Setting Enable 3D Timer