Hdmi settings, Digital audio output, Hdmi settings digital audio output – Toshiba ZL2 User Manual

Page 89

Advertising
background image

89

CONTROLS AND FEATURES

Engl

ish

Some early HDMI equipment may not work properly with your

HDMI TV. Please try setting the Enable Content Type and

INSTAPORT™ options to Off. Adjusting these settings should

allow your early HDMI source to operate properly with your

television.

a

In the Preferences menu, press

B

or

b

to select AV

Connection and press OK.

b

Press

B

or

b

to select HDMI Settings and press OK.

NOTE: HDMI Settings is grayed out on non-HDMI
inputs.

c

Press

B

or

b

to select an item and press

C

or

c

to

select a setting.

• Enable Content Type: On

When set to On, the TV will automatically adjust
settings according to the content type data sent
from the connected HDMI device.

• INSTAPORT™: On

This feature reduces the lag time when switching
HDMI sources.

• RGB Range: Auto

This feature adjusts RGB full range signal
automatically. When Limited is selected, RGB signal
is output in the range from 16 to 235. When Full is
selected, RGB signal is output in the range from 0 to
255.

NOTE:
• If your HDMI connection is capable of 1080p and/or your

television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.

• All of the above HDMI settings need proper HDMI source

devices.
If the HDMI source products do not support these features,
the television may not work properly by activating these
features.

When connecting a surround sound amplifier to the digital audio

output (Sony/Philips Digital Interface Format [S/PDIF]), the

following options can be selected or adjusted.

a

In the Preferences menu, press

B

or

b

to select AV

Connection and press OK.

b

Press

B

or

b

to select Digital Audio Output.

c

Press OK to display Digital Audio Output menu and
press

B

or

b

to select an option.

Audio Format:
Press

C

or

c

to select PCM or Auto.

PCM: This mode outputs PCM format to the digital

audio output socket.

Auto: This mode outputs Dolby Digital (if available)

or PCM to the digital audio output socket.
Dolby Digital

S

Dolby Digital

Dolby Digital Plus

S

Dolby Digital

MPEG

S

PCM

HE-AAC

S

Dolby Digital

Audio Delay:
Press

C

or

c

to select Auto or Manual.

Auto:

This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large between
the image and sound depending on the
connected equipment (amplifier etc.). In that
case, select Manual.

Manual:You can manually adjust the audio signal

timing to meet the video signal timing.

Delay Adjustment:
Press

C

or

c

to adjust the audio signal timing

(0 – 250ms) to meet the video signal timing.

NOTE:
• This feature is grayed out when Audio Delay is in

Auto.

• A time lag will occur when the video signal or audio

signal is changed. Adjust the timing accordingly.

• When adjusting the timing, turn down the volume

of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may occur
when the signal is changed.

• Depending on the connected equipment (amplifier,

etc.), adjustment may not be possible.

• When the optical digital output setting (Auto

t

PCM)

is changed, it may be necessary to adjust the timing
again.

• Do not use other than for audio output from the AV

amplifier, etc. (Malfunction may occur)

HDMI Settings

Digital Audio Output

HDMI Settings

Enable Content Type

INSTAPORT

TM

On

On

RGB Range

Auto

AV Connection

Input Labeling

PC/HDMI 3 Audio

PC

Side Shared Audio

EXT 2

HDMI 3 Audio

Auto

HDMI Settings

Digital Audio Output

Advertising