Toshiba ZL2 - Manual (Page 54)

54
CONTROLS AND FEATURES
En
glis
h
To connect a USB HDD (not supplied)
NOTE: For available USB HDD information, see “Support
Information” on the website.
To register a USB HDD
When you connect a new USB HDD to the USB port on the TV,
the following screen will appear.
a
Press C or c to select Yes and press OK.
The formatting confirmation window will appear.
b
Press
C
or
c
to select Yes and press OK.
Registration will start.
c
If you want to name the USB HDD, press C or c to
select Yes and press OK.
See page 51 to input characters.
The maximum number of characters is 10.
If you prefer the default name ”USB HDD X,” select No
and press OK.
d
The Device List will appear.
You can now use registered USB HDDs.
While in the list mode, the following key operations
are available:
OK button................. To register/remove
RED button .............. To disconnect
GREEN button ........ To change Device Name
YELLOW button..... To test
BLUE button............ To format
NOTE:
• To disconnect a USB HDD from the TV, follow the
procedures for “To disconnect a USB HDD” section
(page 61).
• Connect the USB HDD to the USB 2 port.
Recording and playback cannot be performed if connected
to the USB 1 port.
• Up to 8 USB HDDs can be registered to this TV.
• Recorded programmes saved on the USB HDD can only be
viewed on this TV. They cannot be viewed when connected
to another TV (including the same model of TV), a PC, or
other device.
• If an HDD is re-registered, it will not be formatted.
• When the USB HDD is formatted, all the data stored on the
HDD will be deleted.
Setting up the USB HDD
To USB 2
USB cable
(not supplied)
USB HDD
An unregistered USB HDD has been detected.
Register the USB HDD?
No
Device Name Registered Connected
USB HDD 1
USB HDD 2
USB HDD 3
Device List