Installation and important information, Where to install, When using a wall bracket – Toshiba ZL2 User Manual

Page 6

Advertising
background image

6

INSTALLING YOUR TV

En

glis

h

Installation and important information

Locate the television away from direct sunlight and
strong lights. Soft, indirect lighting is recommended
for comfortable viewing. Use curtains or blinds to
prevent direct sunlight falling on the screen.

Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided. Otherwise secure the TV on the level
surface using the supplied mounting screw.

The LCD display panels are manufactured using an
extremely high level of precision technology;
however, sometimes some parts of the screen may be
missing picture elements or have luminous spots.
This is not a sign of a malfunction.

Make sure the television is located in a position where
it cannot be pushed or hit by objects, as pressure will
break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in
the case.

Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. Studies
indicate that plastics may weaken and crack over time from the combination effects of chemical

agents and mechanical stress (such as weight of TV). Failure to follow these instructions could result in serious
injury and/or permanent damage to TV and TV pedestal.

Please use a wall bracket appropriate for the size and
weight of the LCD TV.

• Two people are required for installation.

• Never use the four screws attached to the TV.

1

Unplug and remove any cables and/or other component
connectors from the rear of the TV.

2

Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.

3

Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s)
are attached to the wall and the back of the TV as
described in the instructions provided with the wall
bracket.

4

Always use the screws supplied or recommended by the
wall mount manufacturer.

Removing the Pedestal Stand:

1

Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the
stand protruding over the edge of the surface.

NOTE: Extreme care should always be used when
removing the pedestal stand to avoid damage to the LCD
panel.

2

Remove the seven screws.

3

Once you have removed all seven screws holding the
pedestal stand in place, remove the pedestal stand from
the TV by sliding the pedestal stand away from the TV.

Where to install

Sturdy tie (as short as possible)

Stand clip

Fixing strap

Screw
(supplied)

Fixing strap

‘P’ Clip

When using a Wall Bracket

Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)

Seven screws

Advertising