B&B Electronics Command Response Protocol HVD100A3 User Manual

Page 29

Advertising
background image

HDV100A3 Command & Response Manual-1306cr

25

B&B Electronics -- 707 Dayton Rd. -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 433-5104


2. Set the “Mask” to the desired pattern (01, 06, 02, 04, XX, XX, XX, XX,
00, CS).

3. Set a filter (1 to 4) to the match value (01, 06, 02, YY, XX, XX, XX, XX,

00, CS). Be sure that this is NOT the same as any other filter value or the
HDV100A3 may become erratic.


4. Sending this value to the HDV100A3 will continuously send this match to

the PC.


Note that sending the “ Start Receive” or the “Stop Receive” command
resets the mask rendering the filters useless.

Advertising