Take pictures in a sequence, Activated. see ‘you in the picture—self-timer, Camera – Nokia N80 User Manual

Page 24: You in the picture—self-timer, The flash

Advertising
background image

Camera

23

• To send an image to the other party during an active

call, select

Options

>

Send to caller

.

• To edit the picture, select

Options

>

Edit

. See ‘Edit

images’, p. 26.

• To print the picture, select

Options

>

Print

. See ‘Image

print’, p. 38.

Take pictures in a sequence

Advanced sequence

is available only in the main camera.

To set the camera to take several pictures in a sequence,
select

Options

>

Advanced sequence

, and set the

shooting frequency. The number of pictures is restricted by
the available memory.

To take the pictures, press the capture key.

After you take the pictures, they are shown in a grid on the
display. To view a picture, press

to open it.

You can also use the sequence mode with the self-timer.

To return to the sequence mode viewfinder, press the
capture key.

You in the picture—self-timer

Self-timer is available only in the main camera.

Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,

select

Options

>

Self timer

>

2 seconds

,

10 seconds

, or

20 seconds

. To activate the self-timer, select

Activate

. The

self-timer indicator (

) blinks and the device beeps when

the timer is running. The camera takes the picture after the
selected delay elapses.

You can also use the self-timer in the sequence mode.

Tip! Select

Options

>

Self timer

>

2 seconds

to keep

your hand steady when taking a picture.

The flash

The flash is available only in the main camera.

Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.

The camera has an LED flash for low light conditions. The
following flash modes are available:

Automatic

(

),

Red

eye redu.

(

),

On

(

), and

Off

(

).

To use the flash, select

Options

>

Image setup

>

Flash

>

On

.

If the flash is set to

Off

or

Automatic

during bright

conditions, the flash still emits a low light when an image
is captured. This indicates to the subject of the picture
that the picture is taken. There is no flash effect on the
resultant picture.

Advertising