Nokia N80 - Manual (Page 98)

Tools
97
Call waiting —If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(
Activate ) or off ( Cancel ), or check whether the function
is activated ( Check status ).
Reject call with SMS —Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or decline a call’, p. 65.
Message text —Write a text to be sent in a text message
when you decline a call.
Image in video call —If video is not sent during a video call,
you can select a still image to be displayed instead.
Automatic redial —Select On , and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call —Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
1-touch dialing —Select On , and the numbers assigned to
the 1-touch dialing keys ( - ) can be dialed by
pressing and holding the key. See also ‘1-touch dial a
phone number’, p. 61.
Anykey answer —Select On , and you can answer an
incoming call by briefly pressing any keypad key, except
, , , and .
Line in use —This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select
Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold in the standby mode.
Line change —To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Connection
Data connections and access points
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
connections can be active at the same time, and access