Nokia N80 - Manual (Page 67)

Make calls
66
edit the text before sending it. To set up this option and
write a standard text message, see ‘Call settings’, p. 96.
Answer or decline a video call
When a video call arrives, is displayed.
Tip! You can assign a ringing tone for video calls.
Press and select Profiles .
Press to answer the video call. Allow video image to
be sent to caller? appears on the display. To start sending
live video image, select Yes .
If you do not activate the video call, video sending is not
activated, and you only hear the voice of the caller. A grey
screen is shown in place of the video image. To replace the
grey screen with a still image captured by the camera in
your device, see ‘Call settings’,
Image in video call , p. 96.
To end the video call, press .
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated
Call waiting in Tools >
Settings > Call > Call waiting .
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see ‘Profiles—set tones’, p. 92.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap . To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Options >
Transfer . To end the active call, press or close the
sliding keypad; the first call is still active. To end both calls,
select
Options > End all calls .
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select
Options during a call for some
of the following options: Mute or Unmute , Answer ,
Decline , Swap , Hold or Unhold , Activate handset ,
Activate loudsp. , or Activate handsfree (if a compatible
headset with Bluetooth connectivity is attached), End
active call or End all calls , New call , Conference ,
Transfer , and Open active standby . Select from the
following:
Replace —to end an active call and replace it by answering
the waiting call.
Send MMS (in UMTS networks only)—to send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press
to send the file to a
compatible device (network service).