Nokia 6020 - Manual (Page 43)

D e v i c e m e n u
42 Copyright © 2005 Nokia
Time and date settings
Select Menu > Settings > Time and date settings and one of the following:
Clock —Set the device to show the clock in the standby mode, adjust the clock,
and select time zone and format.
Date —Set the device to show the date in the standby mode, set the date, and
select the date format and separator.
Auto-update of date & time (network service)—Set the device to automatically
update the time and date according to the current time zone.
Call settings
Select Menu > Settings > Call settings . The following options may be available:
Automatic volume control —Set the device to automatically adjust the speaker
volume according to the background noise.
Call forwarding (network service)—Forward your incoming calls. For details,
contact your service provider.
Anykey answer —Select On ; to answer an incoming call, briefly select any key
except Power , End , Right selection key , or Left selection key .
Automatic redial —Select On ; your device will make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt.
1-touch dialing —Select On ; to dial the names and phone numbers assigned to the
1-touch dialing keys from 2 to 9 , select and hold the corresponding number key.
Call waiting —Select Activate for the network to notify you of an incoming call
while you have a call in progress (network service).
Summary after call —Select On ; the device briefly displays the approximate
duration and cost (network service) of the call after each call.
Send my caller ID (network service)—Select Set by network , Yes , or No .
Line for outgoing calls (network service)—Select phone line 1 or 2 to make calls.
This option is shown only if supported by your SIM card.
Device settings
Select Menu > Settings > Phone settings . The following options may be available:
Phone language —Set the display language of your device. If you select Automatic ,
the device selects the language according to the information on the SIM card.
Automatic keyguard —Set the keypad of your device to lock automatically after a
preset time delay when the device is in the standby mode and no function of the
device has been used. Select
On , and set the time from 5 seconds to 60 minutes.
When the keyguard is on, calls still may be possible to the official emergency number.