Nokia 6020 - Manual (Page 46)

D e v i c e m e n u
Nokia 6020 User Guide 45 Copyright © 2005 Nokia
• Select GPRS access point . Enter the access point name (APN) to establish a
connection to an EGPRS network, and select OK . Contact your network
operator or service provider for the APN.
You can also set the GPRS dial-up service settings (access point name) on your PC
using the Nokia Modem Options software. See "PC Suite," page 63. If you have
set the settings both on your PC and on your device, the PC settings will be used.
Enhancement settings
The enhancement settings menu is shown only if the device is or has been
connected to a compatible mobile enhancement, charger, or hands-free unit.
Select Menu > Settings > Enhancement settings . You can select an enhancement
menu if the corresponding enhancement is or has been connected to the device.
Depending on the enhancement, you can select some of the following options:
Default profile , Automatic answer , Lights , and Ignition detector .
Configuration settings
Some of the network services need to have the correct configuration settings on
your device. Get the settings from a service provider as a configuration message,
or enter your personal settings manually. The service provider may provide a PIN
that is needed to save the settings. For more information on the availability of
the settings, contact your service provider. Configuration settings from up to 10
different service providers can be stored in the device and can be managed within
this menu.
Select Menu > Settings > Configuration settings and one of the following:
Default configuration settings —View the list of service providers stored on the device
(the default service provider is highlighted), and select another service provider as
default. Scroll to a provider, and select
Details to view the list with supported
applications. To delete a service provider from the list, select Options > Delete .
Activate default in all applications —Set the applications to use the settings from
the default service provider.
Preferred access point —Select another access point. Normally the access point
from your service provider is to be used.
To enter, view and edit the settings manually, select Menu > Settings >
Configuration settings > Personal configuration settings .
To add a new configuration, select Add new or select Options > Add new . Choose
one of the application types from the list and enter all the necessary settings. To
activate the settings, select
Back > Options > Activate .
To view or to edit the user-defined settings, select the application that you want
to view, and select the setting to edit.