Nokia 6020 - Manual (Page 44)

D e v i c e m e n u
Nokia 6020 User Guide 43 Copyright © 2005 Nokia
Cell info display —Select On to receive information from the network, depending
on the network cell used (network service).
Welcome note —Enter the note you would like to be shown briefly when the
device is switched on. To save the note, select Save .
Operator selection —Select Automatic ; the device automatically selects one of
the cellular networks available in your area. Select Manual and a network that
has a roaming agreement with your service provider.
Confirm SIM service actions —See "SIM services," page 62.
Help text activation —Select whether the device shows the help texts.
Start-up tone —Select whether the device plays a start-up tone when switched on.
Connectivity
To define the settings for GPRS dial-up connections, establish an infrared connection
between the device and a compatible device.
Infrared
You can set up the device to receive data through its infrared (IR) port. To use an
IR connection, the device with which you want to establish a connection must be
IrDA compliant. You can send or receive data such as business cards, graphics,
images, sound clips, videos and calendar notes to or from a compatible phone or
data device (for example, a computer) through the IR port of your device.
Do not point the IR beam at anyone's eye or allow it to interfere with other IR
devices. This device is a Class 1 laser product.
Send and receive data
Ensure that the IR ports of the sending and receiving devices are pointing at each
other and that there are no obstructions between the devices.
To activate the IR port of your device to receive data through IR, select Menu >
Settings > Connectivity > Infrared .
The user of the sending device selects the desired IR function to start data transfer.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is cancelled and has to be started again.
IR connection indicator
When is shown continuously, the IR connection is activated and your device
is ready to send or receive data through its IR port.
When blinks, your device is trying to connect to the other device or a
connection has been lost.