Pair devices, Receive data using bluetooth connectivity – Nokia 5530 XpressMusic User Manual

Page 81

Advertising
background image

other device

To interrupt the search, select Stop.

3. Select the device with which you want to connect.
4. If the other device requires pairing before data can be transmitted, a tone sounds,

and you are asked to enter a passcode. The same passcode must be entered in both

devices.
When the connection is established, Sending data is displayed.

Tip: When searching for devices, some devices may show only the unique address

(device address). To find the unique address of your device, enter *#2820#.

Pair devices

Select Menu > Settings and Connectivity > Bluetooth.
To pair with compatible devices and view your paired devices, open the Paired

devices tab.
Before pairing, create your own passcode (1 to 16 digits) and agree with the owner of

the other device to use the same code. Devices that do not have a user interface have a

factory-set passcode. The passcode is used only once.
1. To pair with a device, select Options > New paired device. Devices that are within

range are displayed.

2. Select the device, and enter the passcode. The same passcode must be entered on

the other device as well.

3. Some audio accessories connect automatically to your device after pairing.

Otherwise, to connect to an accessory, select Options > Connect to audio

device.

Paired devices are indicated by in the device search.
To set a device as authorised or unauthorised, select from the following:
Set as authorized — Connections between your device and the authorized device

can be made without your knowledge. You will not be asked for authorization or

acceptance separately. Use this status only for your own devices, such as your

compatible headset or PC, or devices that belong to someone you trust. indicates

authorized devices in the paired devices view.

Set as unauthorized — Connection requests from this device must be accepted

separately every time.

To cancel a pairing with a device, select Options > Delete.
To cancel all pairings, select Options > Delete all.

Receive data using Bluetooth connectivity

When you receive data through Bluetooth connectivity, a tone sounds, and you are

asked if you want to accept the message. If you accept,

is displayed and the item

© 2009 Nokia. All rights reserved.

81

Advertising