Sharp SJ-F78PESL - Manual (Page 8)

8
Plasmacluste r
The Plasmacluster automatically starts operating
when the refrigerator is powered on.
To cancel operation
Press the "CHOOSE" button and select the
"Plasmacluster" mark .
Press the / button and select "OFF".
Press the " " button.
To start operation
Select "ON" in step .
Notes about Plasmacluster operation
The ionizer inside your refrigerator releases clusters of
ions, which are collective masses of positive and negative
ions, into the freezer and refrigerator compartments.
These ion clusters inactivate airborne mold fungus.
• There may be a slight odors in the refrigerator. This is
the smell of ozone generated by the ionizer. The amount
of ozone is minimal, and quickly decomposes in the
refrigerator.
mold
fungus
Timer
Up to 99 minutes 30 seconds can be set in interval
of 30 seconds.
Press the "CHOOSE" button and select the "Timer"
mark. Previous set time is displayed.
Press the / button and set the time.
[ : increase, : decrease ]
Push the button continuously, the setting can be
configured quickly.
Press the " " button.
Timer starts. The remaining time is displayed.
When the set time is reached,the end tone will sound.
(About 30 sec.)
To stop the end tone, press "
".
To cancel the timer
Press "CHOOSE" to select the "Timer" mark.
Press the " " button.
NOTE:
During Timer operating it is not possible for the second
time to set Timer.
Express Freezing
( Only for SJ-F73PE, SJ-F74PS, SJ-F78PE, SJ-F79PS )
High-quality frozen foods can be made using this feature and is convenient for home-freezing.
• This feature cannot be used simultaneously with Express Ice Making.
Press the "CHOOSE" button and select the "Express
freezing" mark.
Press the / button and select "ON".
Press the " " button.
Express Freezing ends automatically in about 2 hours.
(The mark disappears.)
To cancel operation
Select "OFF" in step .
NOTE:
• Large foods cannot be frozen in a single operation.
• Express Freezing may require more than 2 hours in the
case operation overlaps with defrosting as operation is
started after defrosting is completed.
• Avoid opening the door as much as possible during
operation of this feature.
(A711)_3-10_ENG_ｂ.fm Page 8 Tuesday, May 9, 2006 2:45 PM