Sharp AY-XPC12RR-AE-X12RR - Manual (Page 10)

GB-8
In cool or dry mode, vertical airfl ow louver
is set obliquely upward to deliver cool
air to the ceiling in order to avoid direct
airfl ow.
In heat mode, vertical airfl ow louver is set
downward to deliver the warm air down to
the fl oor.
1
During operation, press the
COANDA AIRFLOW button.
(COOL / DRY mode)
• The remote control will display “ ”.
(HEAT mode)
• The remote control will display “ ”.
TO CANCEL
Press the COANDA AIRFLOW button
again.
NOTE:
• If you want COANDA AIRFLOW operation
in FULL POWER mode, press COANDA
AIRFLOW button during FULL POWER
operation.
• The COANDA AIRFLOW setting and the
SPOT AIR setting can not be used together.
• The COANDA AIRFLOW setting is not
available in AUTO mode.
1
COANDA AIRFLOW
1
NOTE:
• If you want the SPOT AIR setting in the FULL
POWER mode, press the SPOT AIR button
during the FULL POWER operation.
• The COANDA AIRFLOW setting and the
SPOT AIR setting can not be used together.
• The SPOT AIR setting is not available in
AUTO mode.
The louvres are adjusted so that air fl ow is
delivered to the desired area.
1
Press the SPOT AIR button to select
the desired air fl ow direction.
SPOT AIR
CANCEL CANCEL
RR_OM_10_lang.indb GB-8 RR_OM_10_lang.indb GB-8 2014-02-21 08:53:32 2014-02-21 08:53:32