Sharp XE-A213 - Manual (Page 59)

57
Part
3 FOR THE MANAGER
Part
2
Part
1
2. Text programming (Press s to skip)
3. Rate programming (Press s to skip. / Press A to terminate.)
4. Open rate entry programming (Press s to skip. / Press A to terminate.)
5. Preset rate entry programming (Press s to skip. / Press A to terminate.)
(1) Go to (2) when the preset rate entry does not need to
be changed from "PRESET ENABLE". Otherwise,
press
: key to display "PRESEST DISABLE".
Each time : key is pressed, the display shows
"PRESET DISABLE" and "PRESET ENABLE"
alternatively.
Default setting is "ENABLE".
PRESET RATE
PRESET ENABLE
s
(2) Press the s key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
(1) Go to (2) when the open rate entry does not need to
be changed from "OPEN ENABLE". Otherwise,
press
: key to display "OPEN DISABLE".
Each time : key is pressed, the display shows
"OPEN DISABLE" and "OPEN ENABLE" alternatively.
Default setting is "ENABLE".
OPEN RATE ENTRY
OPEN ENABLE
s
(2) Press the s key to register the rate.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
0.939938 0.939938
(1) Enter the rate using numeric keys, using a decimal
point when setting fractional rates.
The rate can be set from 0.000000 to 999.999999.
Default setting is 0.000000.
ENTER EX RATE
0.000000
s
(3) Press the s key to register the text.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
EX EX
(2) Enter the text.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 14 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Pressing the
P and @ key moves the cursor to
the right and left respectively.
ENTER TEXT
EXCH1
:
(1) Press : key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
A213_3 FOR THE MANAGER(SEEG) 06.4.28 8:33 PM Page 57