Sharp IG-A40E-W - Manual (Page 27)

ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
Р
УССКИЙ
7,000
E-11
SPECIFICATIONS
Model
Power supply
Fan speed
Power consumption (W)
Operating noise level (dBA)
Airfl ow volume (m
3 /hour)
Applicable fl oor surface area (m 2 ) * 1
Ion density (ions/cm
3
) *
2
Power cord (m)
Outer dimensions (mm)
Weight (kg)
IG-A20E IG-A40E
220-240V, 50/60Hz
HIGH MED. LOW HIGH MED. LOW
45 40 34 47 40 34
468 390 306 840 648 510
23 50
25,000 25,000 12,000 7,000
2.0
594(W) 480(H) 230(D)
12,000
22 14 9 39 20 10
940(W) 480(H) 230(D)
10.5 15.0
*1 The target fl oor surface area for which an emitted airborne ion density of about 25,000
ions/cm 3 can be measured at a point near the center of the room (at a height of about 1.2m
from the fl oor), during operation at the HIGH mode when the main unit is placed near a
wall.
*2 Ions, counted per cm 3 , blown into air near the center of the room (at a height of approx.
1.2m from the floor) during operation at each airstream setting when the main unit is
placed near the wall.
• The number of ions will vary according to the room conditions and operation mode.
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the wall
outlet, this product consumes about 0.8W of standby power.
For energy conservation, unplug the power cord when the unit is not in use.
IG-A20E_A40E.en.indd 13 IG-A20E_A40E.en.indd 13 2009/09/17 13:39:12 2009/09/17 13:39:12