Sharp LL-S201A User Manual
Page 18
6.5. Simultaneous Upgrade (Scaler Part + Touch Part)
At the time of selection of the check box -- [for Scaler] and [for TC_Micon] -- on upgrade,
if both check box are chosen, scaler part + touch part are continuously upgradable. If
upgrade of scaler part is completed, the following message box will be displayed, and if
the [OK] button is pushed, upgrade of touch part will be started automatically.
6.6. NOTES
AND
LIMITATION
6.6.1. Scaler part version up
Since it upgrades by displaying a bitmap, it cannot be upgraded if the image output is
modified by graphic board settings.
Moreover, if unnecessary things, such as another window, are displayed on bitmap
display area, upgrade will fail.
Please be careful the trouble of the power supply during upgrade.
6.6.2. Touch part version up
Please ignore the automatic window of a removable memory is displayed at the time of
upgrade. After upgrade is done, please once pull out the AC/DC adaptor and put it again
because the touch panel is no longer recognized after upgrade.