Sharp LL-S201A User Manual
Page 37
(3) Click “Start” button to start calibration. A red cross is displayed at the upper-left
corner of screen.
(4) Touch the center of red cross on screen by pen for about 1 second, then the color of
red cross is changed from red to green and next red cross is displayed. Nine red crosses
are displayed in all. Push ESC key with keyboard to go back to the previous cross.
If the center of cross is not touched properly and the color of cross is not changed and
error message is displayed, close message window by mouse or keyboard, and try again.
Even if the center of cross is not touched properly but the color of cross is changed red to
green, push ESC key to try again.
(5) Repeat Step (4) from 1 to 9, and calibration parameter will be written automatically.
(6) Confirm the message “write OK” and click “End” button.
-> go to Check Pen Touch Accuracy