Oven cleaning, Risk of burns, Preparing for oven cleaning – Neff B45E74N3GB User Manual

Page 25: Starting oven cleaning, Set the operating mode selector to zoven cleaning, Ending/cancelling oven cleaning, Press the clock function button, Removing and fitting the appliance door, Risk of injury, Removing the appliance door

Advertising
background image

25

Oven cleaning

The back wall, ceiling and side walls of the cooking

compartment are coated with a highly porous ceramic layer.

This coating absorbs and disintegrates splashes from baking

and roasting while the oven is in operation.
If these self-cleaning surfaces (rough surfaces) in the oven no

longer clean themselves adequately, they can be regenerated

using the

z

Oven cleaning operating mode.

:

Risk of burns!

The appliance becomes very hot during Oven cleaning. Keep
children away from the appliance.

Preparing for oven cleaning

1.

Remove accessories and hook-in racks, telescopic shelves

or separate fitting systems from the cooking compartment.

2.

Clean the enamel surfaces (smooth surfaces) to avoid any

lasting stains (see section: Cleaning and care).

Starting oven cleaning

1.

Set the operating mode selector to

z

Oven cleaning.

2.

Turn the temperature selector to set the desired cleaning

setting.

Your setting is automatically accepted after 10 seconds and

Oven cleaning starts.

x

and the selected operating time

setting light up on the clock display. The operating time cannot

be changed.
You can activate the preselection mode in the 10 seconds

before Oven cleaning starts.
When the operating time has elapsed, a signal sounds,

:

‹‹

appears on the clock display and the

y

symbol flashes.

Ending/cancelling oven cleaning

1.

Turn the operating mode selector back to the

Û

position.

2.

Press the clock function button.

Removing and fitting the appliance door

You can remove the appliance door to clean it more

thoroughly.

:

Risk of injury!

The hinges of the appliance door may snap shut with great
force. Always fully turn the two locks for fitting and removing the
appliance door.

:

Risk of injury!

If the appliance door has been removed without turning both
locking levers to their limit stops, the hinge may snap shut. Do
not reach into the hinge. Call the after­sales service.

Removing the appliance door

1.

Open the left and right-hand hinge lock (Fig. A).
To do this, push the hinge lock (Fig. B) fully upwards on both

sides with a screwdriver.

Hinge lock closed (Fig. C)
Hinge lock open (Fig. D)

2.

Open the appliance door a little (Fig. E).

3.

Using a coin, fully turn both the left and right-hand locks on

the inside of the appliance at the bottom (Fig. F).
Left lock: clockwise
Right lock: anti-clockwise

4.

Close the appliance door a little, until you feel the locks

engage.
The door can now no longer be opened or closed.

5.

Lift the door handle slightly using both thumbs and lift out the

appliance door (Fig. G).

Cleaning set-

ting

Temperature

display

Clock display (operating

time in hours)

low

:

…†

medium

ƒ

:

‹‹

intensive

:

‚†

$

%

&

'

(

)

*

Advertising