Neff B45E74N3GB - Manual (Page 9)

9
Cleaning the appliance
Clean your appliance before using it for the first time.
1. Remove the accessories from the cooking compartment.
2. Completely remove any residual packaging (e.g. chips of
polystyrene) from the cooking compartment.
3. Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
4. Heat with % Top/bottom heat at 240 °C for 60 minutes.
5. Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
6. Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how you can change the basic settings
■
when your appliance switches off automatically
Switching on the appliance
1. Turn the operating mode selector until the desired operating
mode is selected.
A default temperature appears on the temperature display.
2. Turn the temperature selector to change the default
temperature.
Notes
■
You can only start / Low-temperature cooking if neither •
nor œ are shown in the display.
■
If no default temperature is displayed, the temperature of your
selected operating mode is a fixed setting. You cannot
change this temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the Û position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
1. Press and hold the ± info button for 3 seconds to go to
the basic settings menu.
In the temperature display,
™‚‹ appears.
2. Press the ± info button briefly and repeatedly until the setting
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g. ™„ƒ ).
3. Using the temperature selector, set the required basic setting
within a submenu (e.g. ™„„ ).
4. Press and hold the ± info button for 3 seconds.
Your basic setting is saved.
Operating mode Default temper-
ature in °C
Temperature
range in °C
3 CircoTherm® 160 40 - 200
% Top/bottom heat 170 50 - 275
0 Circotherm intensive 220 50 - 275
4 Circo-roasting 170 50 - 250
+ Full-surface grill 220 50 - 275
Full-surface grill (inten-
sive)*
Fixed setting
( Centre-area grill 180 50 - 275
Centre-area grill (inten-
sive)*
Fixed setting
$ Bottom heat 200 50 - 225
/ Low-temperature cook-
ing
Fixed setting
“ CircoTherm® eco 160 40 - 200
z Oven cleaning Fixed setting
^ Interior lighting Fixed setting
* Turn the temperature selector beyond 275 °C. ‚Ÿ£ appears
in the temperature display
Temperature dis-
play
Meaning
• Residual heat high (above 120 °C)
œ Residual heat low (between
60 °C and 120 °C)
$ %