Keeping the appliance clean, Self-cleaning surfaces, Caution – Neff B15E52N3GB User Manual

Page 23: Oven cleaning, Risk of burns, Preparing for oven cleaning, Starting oven cleaning, Set the operating mode selector to zoven cleaning, Ending/cancelling oven cleaning, Press the clock function button

Advertising
background image

23

Keeping the appliance clean
To avoid getting the cooking compartment dirty,

clean the cooking compartment after each use, as dirt will

bake on the next time it is heated up, and this can only be

removed with difficulty

always remove flecks of limescale, grease, starch and

albumin (e.g. egg white) immediately

use

3

CircoTherm® whenever possible. This operating

mode creates less dirt

Use the universal pan to bake very moist cakes

use suitable ovenware when roasting (e.g. roasting dish) or a

roasting sheet (see section: Accessories)

Self-cleaning surfaces

The back wall, side walls and ceiling of the cooking

compartment are coated with a highly porous ceramic layer.

This coating absorbs and disintegrates splashes from baking

and roasting while the oven is in operation.
The higher the set temperature and the longer the oven is in

operation, the better the cleaning result. Large splashes only

disappear after the oven has been used several times.

Residues can be removed with water and a soft sponge.
Colour variations on the self-cleaning surfaces have no effect

on the self-cleaning function.

Caution!

Damage to surfaces on self-cleaning areas due to applying

oven cleaner.Never clean the self-cleaning surfaces with oven

cleaner.
If oven cleaner accidentally gets onto self-cleaning surfaces,

remove it immediately with a sponge and plenty of water.

Damage to surfaces on self-cleaning areas due to the use of

abrasive and acidic cleaning agents and aids.
Do not use cleaning agents containing abrasive substances

or acids.
Do not use abrasive cleaning aids such as steel wool or

scourers.

Oven cleaning

The back wall, ceiling and side walls of the cooking

compartment are coated with a highly porous ceramic layer.

This coating absorbs and disintegrates splashes from baking

and roasting while the oven is in operation.
If these self-cleaning surfaces (rough surfaces) in the oven no

longer clean themselves adequately, they can be regenerated

using the

z

Oven cleaning operating mode.

:

Risk of burns!

The appliance becomes very hot during Oven cleaning. Keep
children away from the appliance.

Preparing for oven cleaning

1.

Remove accessories and hook-in racks, telescopic shelves

or separate fitting systems from the cooking compartment.

2.

Clean the enamel surfaces (smooth surfaces) to avoid any

lasting stains (see section: Cleaning and care).

Starting oven cleaning

1.

Set the operating mode selector to

z

Oven cleaning.

2.

Turn the temperature selector to set the desired cleaning

setting.

Your setting is automatically accepted after 10 seconds and

Oven cleaning starts.

x

and the selected operating time

setting light up on the clock display. The operating time cannot

be changed.
You can activate the preselection mode in the 10 seconds

before Oven cleaning starts.
When the operating time has elapsed, a signal sounds,

:

‹‹

appears on the clock display and the

y

symbol flashes.

Ending/cancelling oven cleaning

1.

Turn the operating mode selector back to the

Û

position.

2.

Press the clock function button.

Appliance part

Cleaning agent/aid

Enamel surfaces

(smooth surface)

To facilitate cleaning, you can switch on the interior lighting and detach the appliance

door if necessary.
Apply commercially available washing-up liquid or a vinegar solution with a soft, damp

cloth or chamois; dry with a soft cloth.
Soften baked-on food residues with a damp cloth and detergent.
We recommend using oven cleaner if the oven is very dirty. Observe the manufac-

turer's instructions when cleaning with an oven cleaner.
Leave the cooking compartment open to dry after cleaning.

Self-cleaning surfaces

(rough surface)

Please see the notes in section: Self-cleaning surfaces

Door seal

Hot soapy water

Hook-in racks

Hot soapy water:

Soak and clean with a dish cloth or brush.

Telescopic shelves

Hot soapy water:

Clean with a dish cloth or a brush.
Do not remove the lubricant while the pull-out rails are pulled out – it is best to clean

them when they are pushed in.
Do not soak or clean in the dishwasher.

Accessories

Soak in hot soapy water, clean with a brush and sponge or wash in the dishwasher.

Cleaning set-

ting

Temperature

display

Clock display (operating

time in hours)

low

:

…†

medium

ƒ

:

‹‹

intensive

:

‚†

Advertising
This manual is related to the following products: