Sealed surface burners, Burner size – Whirlpool WFG540H0AS User Manual

Page 6

Advertising
background image

6

Sealed Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
Burner cap: Always keep the burner cap in place when using a
surface burner. A clean burner cap will help avoid poor ignition and
uneven flames. Always clean the burner cap after a spillover and
routinely remove and clean the caps according to the “General
Cleaning” section.
Gas tube opening: Gas must flow freely throughout the gas tube
opening for the burner to light properly. Keep this area free of soil
and do not allow spills, food, cleaning agents or any other material
to enter the gas tube opening. Keep spillovers out of the gas tube
by always using a burner cap.

Burner ports: Check burner flames occasionally for proper size
and shape as shown in the previous illustration. A good flame is
blue in color, not yellow. Keep this area free of soil and do not allow
spills, food, cleaning agents or any other material to enter the
burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Do not use oven cleaners, bleach
or rust removers.
1. Remove the burner cap from the burner base and clean

according to “General Cleaning” section.

2. Clean the gas tube opening with a damp cloth.
3. Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden toothpick.
If the burner needs to be adjusted, contact a trained repair
specialist.

4. Replace the burner cap, making sure the alignment pins are

properly aligned with the burner cap.

5. Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, do not service the
sealed burner yourself. Contact a trained repair specialist.

Burner Size

Select a burner that best fits your cookware. See the following
illustration and chart.

A. Burner cap
B. Burner base

C. Alignment pins
D. Igniter

E. Gas tube opening

A. 1-1

¹⁄₂" (25-38 mm)

B. Burner ports

A

B

D

E

C

B

A

A. Incorrect
B. Correct

A

B

Burner Size

Recommended Use

Small

Low-heat cooking

Melting chocolate or butter

Medium

Multipurpose burner

Large

For large cookware

Extra-Large

Most powerful burner

For large cookware

Advertising