Wizard – Billion Electric Company BiPAC 7402VL User Manual
Page 74
VoIP/(802.11g) ADSL2+ Router
Chapter 4: Configuration
Wizard
This section provides easy setup for your VoIP service. Phone port 1 and 2 can be
registered to different SIP Service Provider.
Voice QoS
DSCP:
Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP
Marking allows users to classify traffic based on DSCP value and send packets to next Router.
Setting for Phone Port 1
SIP Service Provider:
This section allows you to select the service provider. When the selection
is done, respective parameters below are automatically displayed.
Select Profile:
It allows you to select a desired SIP provider whom is not defined already
in the SIP Service Provider. You may manually setup the SIP accounts by entering SIP
information to User-defined Profile.
See below for details.
Phone Number:
This parameter holds the registration ID of the user within the SIP registrar.
Authentication Username:
Same as Phone Number.
Authentication Password:
This parameter holds the password used for authentication within
SIP registrar.
Setting for Phone Port 2
Please refer to descriptions in “Setting for Phone Port 1”.
73