Billion Electric Company BiPAC 7402VL - Manual (Page 90)

VoIP/(802.11g) ADSL2+ Router
Chapter 4: Configuration
Prioritization
There are three priority settings to be provided in the Router:
High
Normal (The default is normal priority for all of traffic without setting)
Low
And the balances of utilization for each priority are High (60%), Normal (30%) and Low (10%).
Application : A user-define description to identify this new policy/application.
Time Schedule : Scheduling your prioritization policy.
Priority : The priority given to each policy/application. Its default setting is set to High; you may
adjust this setting to fit your policy/application.
Protocol : The name of supported protocol.
Source Port
: The source port of packets to be monitored.
Destination Port : The destination port of packets to be monitored.
Source IP Address Range
: The source IP address or range of packets to be monitored.
Destination IP address Range : The destination IP address or range of packets to be monitored.
DSCP Marking
: Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte.
DSCP Marking allows users to classify traffic based on DSCP value and send packets to next
Router. See Table 4. Here is the DSCP Mapping Table:
89