Audiovox RVMPKG2 - Manual (Page 10)

10
L: Infra- RED receiver for M: 3-position switch for Navigation
Navigation remote control voice command display timer on rear
of mirror (30 sec., 150 sec., 300 sec.)
N: 2-position switch for hands free
microphone sensitivity High/Low select
SW1, SW2 and SW 3:
1. Vehicle Reversing :
SW 1: No function LCD automatically turns on
SW 2: No function Rearview camera image appears on
the mirror
SW 3: No function
2. Vehicle driving:
SW1: Turn on the Navigation display timer mode. When SW1 is
pressed, the LED will turn yellow. The navigation image will appear
for the preset time 30sec, 2.5 minutes or 5 minutes. Once the preset
time has expired, the LCD will return to its previous state. The
navigation image will reappear with the next voice command prompt
from the navigation computer.
SW2: Turns the navigation screen image on and off. Press once to
turn on the continuous Navigation display.
Press again to turn off the Navigation display. Then press Sw1 if you
want to engage the Voice command navigation display timer.
SW3: When pressed and held, the rear camera image appears on the
mirror. When released, the LCD will return to its previous
appearance.