Audiovox RVMPKG2 - Manual (Page 8)

8
3. Signal Inputs
The signal input connections for the system include:
(1) Rear Camera: By connecting rear camera with control box plug, users can
see the rearview when the vehicle is in reverse.
(2) Hands Free Jack: Put the hands free plug (3.5mm) into hands free jack and
put the other side of plug into the headphone jack of the mobile phone. (If
necessary, find a compatible adapter).
(3) Navigation: The navigation signal is supplied via the connector plugged
directly into the rear of the mirror.
(4) Video In, Video Out, Audio In, Audio Out, Audio/Video Input and Output
Plugs (3.5mm) are located in the control box. By connecting video and audio
signals with these plugs, the user can enjoy watching video, only while the
parking brake is on.
(5) Navigation Voice command display timer: There is a three position switch
located on the bottom right rear of the mirror/monitor. The three settings are
30 seconds, 150 seconds and 300 seconds. The vehicle operator can select to
engage the navigation display timer by pressing SW 1 while the vehicle is
going forward. The Navigation Display will appear for the preset time
whenever the navigation system issues an audible voice command.