Brother HL-5280DW - Manual (Page 35)

Configuring your wireless network printer (HL-5280DW only)
3 - 11
3
29
Press Set.
Enter a user ID for LEAP.
30
Press Set.
Press the + button or the - button to select PASSWORD.
31
Press Set.
Enter a password for LEAP.
Press Set.
32
Press the + button or the - button to select APPLY.
33
Press Set.
Press the + button or the - button to select YES or YES&REPORT.
Note
In order to make your wireless settings effective, you must select the APPLY option from the WIRELESS sub
menu and then select YES or YES&REPORT. If you do not do this, the network settings will not be used unless
you switch the printer off and then on again. If you select YES&REPORT, the printer will print the network
printer server settings list.
PASSWORD
***
APPLY
YES YES&REPORT