Brother HL-5280DW - Manual (Page 97)

Wireless installation in ad-hoc mode (HL-5280DW only)
10 - 18
10
6
If your network is not configured for Authentication
and Encryption, the following screen will appear. To
continue installation, click OK and go to step 9.
7
If your network is configured for Authentication and
Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must
ensure that it is configured to match the
Authentication and Encryption settings of your
existing wireless network. Choose the
Authentication Method and Encryption Mode
from the pull-downs in each setting box. Then enter
the Network key and click Next.
Note
• If you want to set more than one WEP key, click Advanced.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.
8
Enter a new SSID and choose Authentication
Method and Encryption Mode from the pull-downs
in each setting box. Then enter the Network Key
and click Next.
Note
If you do not know the Authentication or Encryption settings for network, contact your network administrator.