3 performing the timer settings – Beko 19WLP530HID User Manual
Page 26
-24-
Helpdesk: 0845 600 4911
Note: Since the use of certain functions in order to change the picture sizes for
collective projection or commercial purposes (modifying the height and
width etc.) will be deemed an infringement of the picture’s copyright, legal
proceedings can be carried out as required under relevant laws.
4.2.6.8 Overscan: Off
When this mode is selected, high defined picture from the HDMI is not cropped and it
is displayed in its original size. This is only active in HDMI mode and for resolutions at
or above 720p.
4.3
Performing the timer settings
Your television is equipped with the feature of
being able to be turned off and on at periods
that you specify. Press the
MENU button.
Select
TIMER menu by pressing the Right/Left
movement buttons and press
OK button. In this
menu, you can select one of the titles for which
you would like to perform an operation.
TIMER
Clock
22 / Sep 2008 14:11
Off Time
Off
On Time
Off
Sleep Timer
Off
Auto Sleep
On
Select
Back
Exit
4.3.1 Clock
Time information is automatically obtained from EPG (Electronic Program Guide) in
Digital channels, and from Teletext in Analogue channels.
4.3.2 Off Time
Select the
Off Time tab by pressing the Up/Down movement button in TIMER
menu and confirm your selection with the
Right movement button or OK button. In
this menu, you can set the off time for your television with weekly or daily periods.
4.3.3 On Time
Select the
On Time tab by pressing the Up/Down movement button in TIMER
menu and confirm your selection with the
Right movement button or OK button. In
the On Time menu, you can set the on time for your television with weekly or daily
periods. In this menu, you select one of the TV, DTV or Radio modes, a specific
channel and the volume that would become active when the TV is turned on.
4.3.4 Sleep Timer
Sleep Timer switches your television automatically to Standby Mode after the preset
time has elapsed. You can adjust this time between 10 and 240 minutes with certain
intervals. To do this, select the
Off Time tab and press Right/Left movement
buttons to select the desired time.
4.3.5 Auto Sleep
Auto Sleep option can be set to on or off. When the Auto Sleep function is set to
Off,
NO SIGNAL will appear on the screen when the TV does not receive any signal from
any source and your television will not be turned off. When the Auto Sleep function
is set to
On, NO SIGNAL will appear on the screen if the TV does not receive any
signal from any source and the countdown OSD of 5 minutes will appear. Television
is turned off at the end of the time.