Belkin PM01110-A User Manual
Page 34
32
G Wireless Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRnaTe seTUP MeTHod
setting your Internet service Provider (IsP) Connection Type to
dynamic IP
A dynamic connection type is the most common connection type used
with cable modems� Setting the connection type to “dynamic” in many
cases is enough to complete the connection to your ISP� Some dynamic
connection types may require a host name� You can enter your host
name in the space provided if you were assigned one� Your host name
is assigned by your ISP� Some dynamic connections may require that
you clone the MAC address of the PC that was originally connected to
the modem�
Change Wan MaC address
If your ISP requires a specific MAC address to connect to the service,
you can enter a specific MAC address or clone the current computer’s
MAC address through this link�