Belkin PM01110-A - Manual (Page 96)

94
G Wireless Router
sections
table of contents 1 2 3 4 5 6 7 8 10 9
TRoUblesHooTInG
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin client card (Wireless Network Card or Adapter) for a
home network�
4� Under “Network Authentication”, select “WPA-PSK (no server)”�
5� Type your WPA key in the “Network key” box�
Important: WPA-PSK is a combination of numbers and letters from
A-Z and 0-9� For WPA-PSK, you can enter eight to 63 characters� This
network key needs to match the key you assign to your G Wireless
Router or access point�
6� Click “OK”, then “Apply” to save the settings�
solution:
Clients must use the same key that the G Wireless Router or access
point uses� For instance, if the key is “Smith Family Network Key” in
the G Wireless Router or access point, the clients must also use that
same key�
1� Double-click the “Signal Indicator” icon to bring up the “Wireless
Network Utility” screen� The “Advanced” button will allow you to
view and configure more options of your client card�
2� Once the “Advanced” button is clicked, the Belkin Wireless LAN
Utility will appear� This Utility will allow you to manage all the
advanced features of the Belkin client card�
3� Under the “Wireless Network Properties” tab, select a
network name from the “Available Networks” list and click the
“Properties” button�