Belkin PM01110-A User Manual
Page 40
38
G Wireless Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRnaTe seTUP MeTHod
setting your Connection Type if you are a Telstra
®
bigPond/optusnet Cable User
Follow the on-screen steps and click “Apply Changes” to complete
your setup�
setting Custom domain name server (dns) settings
A “Domain Name Server” is a server located on the Internet that
translates Universal Resource Locators (URLs) like “www�belkin�com”
into IP addresses� Many Internet Service Providers (ISPs) do not require
you to enter this information into the Router� The “Automatic from ISP”
box should be checked if your ISP did not give you a specific DNS
address� If you are using a static IP connection type, then you may
need to enter a specific DNS address and secondary DNS address for
your connection to work properly� If your connection type is dynamic
or PPPoE, it is likely that you do not have to enter a DNS address�
Leave the “Automatic from ISP” box checked� To enter the DNS
address settings, uncheck the “Automatic from ISP” box and enter your
DNS entries in the spaces provided� Click “Apply Changes” to save
the settings�