Bradley Smoker AERADA 1000 Series S53-327 DC - Manual (Page 13)

Installation Aerada 1000/1100 Series
Bradley Corporation • 215-1628 Rev. A; EN 08-201 5/21/08 13
7 Install shut-off screw.
8 Install mixer handle (for faucets with external mixer only).
Result: The battery is now replaced.
Cleaning or Replacing Inlet Filter
1 Close supply valves.
2 Disconnected braided hoses and clean or replace fi lter
(for a new fi lter, see “common replacement parts”).
3 Connect braided hose with fi lter to supply valve
Cold water > white label Hot water > no label
Result: The fi lter is now cleaned or replaced.
Adjusting Hot Water Limiter (External Mixer)
The proportion of hot water can be switched from approximately 85% to 95%
(or reverse) depending upon inlet water pressures and temperatures. The default
setting is 85%.
WARNING Hot water may burn your skin.
Hold hand carefully under water and remove quickly
1 Remove mixer handle.
2 Carefully pull out hot water limiter from handle (using pliers) and reverse by
180°.
> Settings of hot water limiter (View from placement in mixer handle)
3 Mount mixer handle.
Result: The proportion of hot water is now changed.
180°
95% 85%