Beltronics E936CS - Manual (Page 10)

display and a short audible “beep” will sound indicating you
are now in the Selectable Features Mode.
2. Immediately after the “beep”, the display will show the status
of the sws ™ Selectable Feature: “SWS on” or “SWS off”. Press
the AUD button to select
ON
or
OFF
for this feature.
3. Pressing the
CTY
button moves to the next Selectable
Feature:
VG
-2 Guard ® Alert. The display will show either “VG-2
on ,” or “VG-2 off”. Press the
AUD
button to select
ON
or
OFF
for this feature.
4. Pressing the
CTY
button again moves to the next Selectable
Feature: Replace sws ™ Digital Voice Messages with “beep”. The
display will show either “SWSvoice” or “SWSclick”: Press
the
AUD
button to select
VOICE
or
CLICK
for this feature.
5. Press the
CTY
button again to move to the next Selectable
Feature: Radar/Laser Digital Voice. The display will show
“VOICEon” or “VOICEoff”. Press the
AUD
button to select
ON
or
OFF
for this feature.
6. Press the
P
/
V
button to exit Selectable Features Mode. Two
“beeps” confirm that you have exited this mode and your unit
will be
ON
. “HIGHWAY”, “City X or City ALL” will be
presented in the display, based on your previous selection.
General Guidelines
Do not mount your unit directly behind windshield wipers or
mirrored sunscreens which block Radar and Laser signals
and substantially reduce warning range. Unlike “after market”
mirrored sun-screens, regular tinted glass does not affect
Radar reception. Radar signals are also reflected by the “heated
windshields” known as Instaclear
® and ElectriClear ® available
as an option on some vehicles. This type of windshield makes
any dash, visor or windshield mounted detector ineffective.
(If in doubt, check with an appropriate dealership to see if
this applies to your vehicle.)
Instaclear is a registered trademark of the Ford Motor Company.
ElectriClear is a registered Trademark of Libbey, Owens, Ford, and Delco-Remy
.
10
INSTALLATION