Beltronics E936CS User Manual

Page 17

Advertising

Laser Alerts

When Laser is detected, the display will flash “LASER”
coupled with a distinct Laser audio alert. If a vehicle is a long
distance from the source of Laser pulses, fewer pulses will
generally be received. The closer the vehicle is to the source of
Laser pulses, the greater the likelihood of receiving a steady
stream of Laser pulses. The reason for this is the aiming
stability of the Laser gun and the fact that it is difficult to hold
the gun absolutely still. Any movement of the gun results in
motion of the beam at the target. The further the target, the
greater the displacement of the beam and the shorter the dwell
time of the beam at the target point. Therefore, there is the
possibility of receiving only a few Laser pulses. Due to these
characteristics, all Laser alerts should be taken seriously.

VG-2 Guard

Alert

Whenever your EXPRESS 936 detects signals from the
Interceptor

-2 (Radar Detector Detector), the

-2 Guard

feature engages. (

-2 Guard

must be selected

- see page

9 for more information). A distinct, 2-second audio warning

coupled with the Digital Voice announcement and Text
Message of “

-2 alert”confirms activation of

-2 Guard

This message continues for as long as

-2 Guard

activated. During the

-2 alert your unit does not detect

Radar or sws

™

signals. However, the presence of the

Interceptor

-2 indicates that traffic is being monitored

and speed measurements may be taken. When the
Text Message of “

-2 alert” is over, your unit resumes

scanning for Radar and sws

™

signals.

Note: activation

-2 Guard

does not affect detection of Laser signals.

Safety Warning System

(sws

™

) Alerts

With the Safety Warning System

feature

and an sws

™

transmitter in use, your detector will provide a unique, 2 second
sws

™

tone coupled with a Safety Warning System