Bose 50 - Manual (Page 12)

10 October 17, 2001 AM189854_05_V.PDF
Setting Up
Connecting the Acoustimass ® module to the multi-room interface
Connect the module to the interface with the audio input cable (Figure 8).
1. Insert the right-angle multi-pin connector on the audio input cable into the AUDIO INPUT
jack on the module. Align the connector at the angle shown in Figure 8.
2. Plug the small black multi-pin connector (flat side facing up) into the jack marked ROOM A
(PRIMARY) on the back of the interface.
Note: The female RCA connector on the audio input cable is for connecting the digital
output of a DVD player or other digital source to the system. See “Setting up a digital sound
source” on page 12.
Note: Be sure that each connector is inserted completely into each jack.
For information on connecting multi-room systems, see “Connecting additional rooms” on
page 40.
Connecting the CD changer to the multi-room interface
Connect the CD changer to the interface with the CD changer cable (Figure 8).
1. Plug a blue multi-pin connector (flat side facing up) into the jack marked BOSE CD on the
back of the interface.
2. Plug the other blue multi-pin connector (flat side facing left) into the jack marked BOSE
CD on the back of the CD changer.
Note: Be sure that each connector is inserted completely into each jack.
Figure 8
Speakers, CD changer, and
multi-room interface connec-
tions
AUDIO
INPUT
RIGHT RIGHT
CENTER
LEFT
LEFT
FRONT SURROUND
ANTENNA
FM AM
BOSE CD
AUX VIDEO 1 VIDEO 2 TAPE IN OUT L L L L L
R R R R R
RECORD ROOM A (PRIMARY) ROOM B
ROOM D ROOM C
POWER
SERIAL DATA
!
SEE USER’S GUIDE 12V AC 1.6A
AUDIO INPUT AUDIO INPUT
OUTPUTS TO
CUBE SPEAKERS
L C R R L
Right Right Center
AUDIO INPUT
Right-angle
connector
Left Left
Audio input
cable
Power jack
ROOM A multi-pin
connector
Interface
power pack
cord
Digital audio source
connector
CD changer
cable
Surround speakers Front speakers