Bose 50 User Manual

Page 39

Advertising
background image

AM189854_05_V.PDF

October 17, 2001

37

Operating Your Lifestyle

®

50 System

Equalizing the volume levels of external sources

The SIGNAL LEVELS selection in the MENU options allows you to adjust and equalize the
volume gain levels received from externally connected sources (VIDEO 1, VIDEO 2, AUX, TAPE).
For example, you can adjust the gain level of an external source so that volume level 50 on this
source sounds as loud as level 50 from a built-in source.

1. Using the MENU button, select SIGNAL LEVELS.

2. Press VIDEO 1, VIDEO 2, TAPE or AUX and you are shown a gain adjustment display

(Figure 41). After listening to the built-in sources (FM, AM, CD) at your preferred volume
level, use the arrow keys to adjust the signal level settings (GAIN) of the connected
sources until you get the same volumes. The adjustment range is from –15 to +15.

Figure 41

Gain adjustment display

Adjusting LCD contrast

You can adjust the contrast of the display. Press and hold the SOURCE button until Lcd
appears. Use the lower arrow buttons to change the contrast level.

Figure 42

LCD contrast adjustment
display

Adjusting the Personal™ music center beep

You can adjust the loudness of the beep made when pressing the display buttons. Press and
hold the SOURCE button until Lcd appears. Use the upper arrow buttons to select the bEEP
display. Use the arrow buttons to select between Lo, HI, and – – (off).

Figure 43

Beep adjustment display

Advertising