Bosch PROTANKLESS GWH 345/450 ESR User Manual

Page 5

Advertising
background image

6 720 607 909

Appliance details

5

Water resistant

IP X4 (protection against water drops)

2.3

Unpacking the GWH-345/450-ESR
heater

This heater is packed securely.

The box includes:

• Wall-mounted gas fired recirculating water heater

• Bracket and screws for wall hanging the heater

• Exhaust vent adaptor (with 4 screws and gasket

provided)

• Combustion air inlet adaptor (with 4 screws and

gasket provided)

• Installation manual

• Product registration card

• Energy Guide label

• Pressure relief valve

Inlet air restrictors

– GWH 345 ESR N: Ø38/40/42
– GWH 345 ESR LP: Ø38/40/42
– GWH 450 ESR N: Ø44/47/50/55
– GWH 450 ESR LP: Ø47/50/55/60

Do not lose this manual. Please complete and return
the enclosed product registration card.

Before installing the unit, be certain you have the
correct heater for your type of Gas - Propane or
Natural Gas.
Identification labels are found on the
shipping box, and on the rating plate which is located on
the right side panel of the cover.

To remove front cover

B Loosen the two Philips head screws located as

shown in fig. 2.

Fig. 2

Screws

B Pull control panel outwards and then pull it

downwards (Fig. 3).

Fig. 3

Service position to access water and electric
connections

B Lift front cover upward and remove.

The GWH-345/450-ESR is not approved or
designed for:

• Manufactured (mobile) homes, RV's or boats

• Outdoor installation

• Combination venting with other appliances

• Closed loop heating applications.

i

The front cover is secured with two
screws to prevent unauthorized access.
Always secure the control panel and front
cover with these screws.

Front cover

Control panel

Low voltage
access cover

Advertising