Philips Do-It-Yourself clipper Se tondre les cheveux soi-même - Manual (Page 11)

shaving
Tip: Shaving is easier when the hairs are shorter than 1mm. If the hairs are
longer than 1mm, we recommend that you use the cutting element without the
comb attachment to pre-cut hairs to the shortest setting.
1 Switch off the appliance.
2 Pull the comb attachment off the swivel head.
3 Press the release buttons (1) and remove the cutting unit from the
handle (2).
4 Attach the shaving head by pressing it onto the appliance (‘click’).
Make sure that the shaving head locks into position properly.
5 Remove the protection cap from the shaving head.
6 Adjust the position of the swivel head to make shaving easier. You can
do this before and/or during use.
– 3 mm – 5
– 7 – 9
– 11
– 15
English
11