Philips Do-It-Yourself clipper Se tondre les cheveux soi-même - Manual (Page 13)

6 Rinse the inside of the appliance under the tap or clean it with the
cleaning brush supplied.
7 Insert the lug of the cutting element into the slot (1) and push the
cutting element back onto the swivel head (2).
Cleaning the shaving head
Note: Regulary check the shaving foil for cracks.
1 Switch off the appliance and disconnect it from the mains.
2 Press the release buttons on the shaving head (1) and remove the
shaving foil from the shaving head (2).
3 Rinse the shaving head and shaving foil under the tap.
Note: To clean the shaving head with the cleaning brush, brush the inside and
outside of the shaving head and the outside of the shaving foil. To remove cut
hairs from the inside of the shaving foil, tap the bottom of the shaving foil
gently on a flat surface.
4 Press the shaving foil back into the shaving head.
English
13