Philips Do-It-Yourself clipper Se tondre les cheveux soi-même - Manual (Page 12)

7 Place the shaving head on your scalp and start shaving.
Press the shaving head onto your scalp lightly.
Note: Make sure that the shaving foil is always in full contact with your scalp.
Cleaning and maintenance
Clean the appliance every time you have used it by rinsing it under the tap
or with the cleaning brush supplied.
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol, acetone or ethereal oils to clean the
appliance.
Be careful that the cutting element does not fall on the floor.
Cleaning the cutting element and comb attachments
1 Switch off the appliance and disconnect it from the mains.
2 Remove the comb attachment.
3 Rinse the comb attachment under the tap or clean it with the
cleaning brush supplied.
4 Place your thumb in the center of the round side of the cutting
element and your index finger on the teeth of the cutting element
(1). Use your index finger to lift the cutting element from the swivel
head (2).
5 Rinse the cutting element under the tap or clean it with the cleaning
brush supplied.
– 3 mm
– 5
– 7 – 9
– 11 – 15
English
12