Bosch BOSCH RANGE - Manual (Page 18)

English 16
To turn on all three elements, Push in and turn the control knob to the icon.
Turn knob left or right to set the heat level.
Bridge Element Control Knob
(some models)
The bridge element connects two single elements to create one long cooking sur-
face.
Depending on the model, the bridge element is either activated in conjunction with
the front single element ( ) or the rear single element ( ). Refer to the control
knob on your appliance to determine your configuration.
Turn ON the bridge element and the small element together
1. Push in on the control knob and turn clockwise to the desired heat setting.
Tip: To complete the connection and create an even longer cooking surface ,
turn ON the other single element, too.
To use the single element without bridge
1. Turn the knob counterclockwise.
This section explains how to operate the oven. See “Getting the Most Out of Your
Oven” on page 24 for guidelines to improve oven results.
About the Oven
Figure 11: Triple Element Knob
Inner
Element
All Three
Inner and Middle Element
Elements
Only
Figure 12: Bridge Element Knob
Operation - Oven
Front Single Element Element Location
Bridge Element with
Front Single Element
Rear Single Element Element Location
Bridge Element with
Rear Single Element
Bridge element activated with Bridge element activated with
front single element:
rear single element: